Many of you may remember the long term BMW 335d we had the pleasure of reviewing back in 2009. The 3.0-liter turbocharged engine put down 282hp and 428 lb-ft of torque while enjoying 26mpg city and 36mpg highway. So when the opportunity came to tune a 335d, we grabbed the parts we could find and headed to LTBMW in El Monte, CA.

Our subject, Derrick Vieira’s BMW 335d, was equipped with the Sport package that included 18" wheels, Potenza RE050 run-flat tires and Sport suspension. While the setup was good, we felt an improvement could be made with Öhlins Road & Track coilovers, VMR wheels with Continetial ExtremeContact DW tires plus a Burger Motorsport tune. The parts would be installed by up and coming BMW specialist, LTBMW. The company has seen a stratospheric rise in just a few years and its well-equipped workshops include several lifts and a paint booth to handle almost any request.


If you’re a motorsport enthusiast, you’re familiar with Öhlins remote-reservoir systems on motorcycles and racing wins at Le Mans, Indy Car, touring cars, sports cars and GT racing, to name a few.

So the choice of Öhlins Road & Track coilovers for our project was an easy one. The system is, as the name suggests, comfortable when running errands, while weekends can be spent chewing rumble strips at the track.

Both front and rear feature Dual-Flow Valves, adjustable damping and lightweight corrosion-resistant bodies that are rebuildable. The front struts are 15mm shorter than a stock strut housing, while the springs on each corner were specifically designed for the 335d. The rear uses Öhlins dampers, springs and adjustable perches.

The reputation and craftsmanship is impressive, and so is the $2599 price tag. But you get what you pay for, and Öhlins has a remarkable pedigree to back up this product.


The technicians at LTBMW had the coilovers installed in no time, proving the installation can be achieved in a few hours with the right tools and skills.

The front struts utilize OE top mounts and the shorter springs provided in the kit. On both the front and rear, the auto-leveling sensor needs to be undone first before unbolting the tie rod, pinch bolt, strut bar and top mount.

The rear perch is mounted on top of the new spring rather than on the control arm. After unbolting the bottom of the damper, control arm and auto-leveling sensor, pop the trunk and remove the trim to access the top mount.

The OE top mount nut and washer have to be separated and replaced with the Öhlins-supplied nut. After installation, the adjustment knobs can be custom-fitted for easy accessibility.

Full details, our step-by-step guide and video are available at

Wheels & Tires

Once the LTBMW techs had the coilovers in place, they transferred the OE tire pressure sensors into our 19" VMR V701 wheels before mounting the Continental ExtremeContact DW tires.

The VMR V701s are available in 18" or 19" sizes in hyper silver, gunmetal or matte black finishes. We opted for 19x8.5" front and 19x9.5" rear wheels in attractive hyper silver.

In the past we’ve used Continental ExtremeContact DW tires on track and were impressed by the grip they provided in both wet and dry conditions. For the staggered V701 fitment, LTBMW mounted 235/35 R19 front and 265/30 R19 rear tires.


While the BMW 335d makes an impressive 428 lb-ft at 1750rpm, Burger Tuning offers the JB Diesel Performance Tuner that suggest gains of 60hp and 100 lb-ft torque. This whetted our appetite to discover more.

The JBD Tuner plugs into the fuel rail, intercepting the signals and altering them to increase fuel delivery. It includes a controller that can be ziptied out of the way. It has an internal rotary controller that allows you to alter the fuel setting manually from under the hood. With a range of 0-100, it was set midway by Burger Tuning, but Derek only reported a significant difference once it approached 100%.

Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!