Heater Fan Testing and Replacement
|
Once the coolant in the heater core was contained, I removed the three clips at the bottom of the heater box shown in this photo (one has already been removed). This allowed me to reach into the heater box to remove the two left-side bowden cables at their mounting points. The three pop rivets at the top of the heater box could then be drilled out to separate the halves of the heater box. Note that there is a right-hand bowden cable and another going to the heater valve. Factory procedures call for re-assembling the heater box with pop rivets or 4x10mm bolts. I am the proud owner of a new fancy schmancy pop rivet gun. View Related Article
|
|