Factory supercharged cars are wonderful. More times than not, a hefty increase in power simply involves installing a smaller blower pulley to make it work harder and to match the increased, forced-inducted air with the proper amount of fuel by way of controlling the ECU. That's why we wanted to do a project on the Cooper S versus the base model-more power!

The Mini Cooper S is rated at a modest 163 bhp, but we want a reliable 200 hp at the wheels. Where most Cooper S cars are known to dyno around 145 whp, a near 40% increase in power without getting into the motor should be classified as a remarkable feat. How quick would this car be? Think about it: at 200 whp our MINI would be roughly hauling only 14.5 lb per whp, compared to our Project M3 and Project S4 cars that started life at around 15- and 16.5-lb per whp, respectively. However, so we don't get ahead of ourselves, let's see if this can be done by starting with a simple pulley, intake, software and full exhaust upgrade.

Several companies offer supercharger pulleys for this car, but we decided to try one from Mini Mania. Started by long-time Mini racer Don Racing in 1975, Mini Mania now offers a full range of products for both the classic Mini and new MINI, including motor, suspension, brake and aesthetic upgrades-everything else you can throw on these cars. It's obvious Mini Mania's roots and passion for racing are still present-by the time you read this the company would have co-hosted this year's Ultimate Mini Challenge at Laguna Seca Raceway.

For Project Mini we ordered a full Stage 2 kit from Mini Mania, comprised of a supercharger pulley, belt, heat-shielded intake system, headers with catalytic converter and a dual sequential high-flow cat-back system-all for about $1,750. We opted for the software tuning option as well, which costs an extra $745.

Starting off with the air intake kit, the system reportedly improves on existing designs for greater efficiency. It also uses the factory front grille air inlet and windshield vents to draw in air to the K&N filter.

The exhaust system is a piece of work. We ordered one with a catalytic converter connected to it; however, you can order your exhaust headers without the cat. The exhaust header system is a polished, four-into-two-into-one design. Equal-length primaries ensure flow improvements and are also threaded for the oxygen sensors. Mini Mania reports that with this system alone a significant increase in mid-range torque can be had. From there the cat-back system, also known as the Mini Mania "S Performance exhaust," uses a twin sequential exhaust system, reportedly to free up more horsepower from the supercharged motor.

The three-piece supercharger pulley has a 15% reduction in diameter compared to the factory unit, and is reportedly good for an additional 4 psi boost. This design allows installation of the pulley without a press, enabling easy pulley removal. Mini Mania rents and sells the special tool for easy stock pulley removal.

The box of cool stuff was sent to evosport along with Project Street S for installation and testing. evosport's shop in Huntington Beach makes it an easy, one-shot deal to have the parts installed and dyno-tested, and the technicians there have been helping us out with several of our project cars. The company specializes in performance upgrades, tuning, installations and service for Mercedes-Benz, BMW and Ferrari

Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!