With its huge inventory of motor cores, Bavarian Engine Exchange has the luxury of being very selective in choosing only the best cores to rebuild-and the rest get tossed out. Each selected core then undergoes a careful inspection, and after passing it's disassembled, cleaned, stripped and precision measured for specifications. All of the machine work is done to exact tolerances, and all measurements are triple-checked before re-assembly.
The re-assembly process is done entirely by hand and in a climate-controlled clean room by certified engine technicians. During assembly all machined surfaces are measured once again for accuracy, followed by a quality control inspection after assembly. The engines are dynamically tested for compression, leakdown, oil pressure and oil leaks using an ultra-violet dye process.
Once completed and thoroughly checked out, the motor is packaged in a wooden crate for protection against shipping damage, and the package is insured at full value in the unlikely case of a transit mishap. Shipping to anywhere in the U.S. in included in the price.
Should you choose the Performance Upgrade option, Bavarian Engine Exchange will include flow-tested CNC machine porting and hand polishing to the cylinder head, as well as Bavarian Engine performance camshafts. I got my own turbo-specific camshafts elsewhere, but I went ahead and had Bavarian Engine Exchange port and polish the cylinder head for Project M3.
|
|
|
Active Autowerke
|
JE Pistons
|
|
Bavarian Engine Exchange
|
Pauter Machine
Chula Vista
CA
www.pauter.com
|
|
BMP Design
|
Total Seal, Inc.
|
|
Evosport inc.
| |