Rear view mirror like a periscope
Virtually every part of the outer chassis was redesigned for the Aventador J, yet it shows the spirit of Lamborghini in its most concentrated form. The car’s dimensions are extreme: the overall length is 4890 mm, the overall width (excluding mirrors) is 2030 mm while the height is 1110 mm.

The highest points are marked by the rear view mirror, which is perched on an arm like a periscope, and by the two safety bars behind the seats. In place of the classic front windshield there are two small wind deflectors. The occupants of the Aventador J are confronted by the element of the wind in much the same way as a superbike rider – therefore the right clothing is prerequisite for every trip.

Front scoop with winglets
The front of the Aventador J is somewhat narrower than that of the Aventador. The front end is dominated by a highly distinctive carbon fiber air scoop, with central fixing braces and upward tilting winglets on the outer edges. Viewed from the side, the front end of the Aventador J looks like a Formula 1 racing car.

Red with chrome effect, wheels with CFRP fan
The black of the carbon fiber parts is visibly evident throughout the car – the significantly wider sill elements and the mighty rear diffuser form a perfect contrast to the rich red body paintwork. The special red color was developed specifically for this Aventador - a highly intensive red with a slight chrome effect.

The wheels, of course, were also developed specifically for this car, with 20-inch rims at the front and 21-inch at the rear. The five-spoke aluminum wheels have a central lock system and an additional carbon fiber insert that functions like a small fan for optimum brake ventilation.

Naturally, the doors on the Aventador J also open upward. They are considerably thinner than on the Aventador and are fitted with a tiny, fixed side window. The muscular flanks around the rear wheels are hallmark Lamborghini and make it immediately apparent where this particular bull keeps his power.

Rear end purely for aerodynamics and ventilation
because of its ample dimensions, the eye is drawn inexorably to the rear end. It consists in principle of just three elements – the carbon-fiber rear diffuser, the four huge tail pipes and the rear lights with their typical Lamborghini light signature in the form of a Y. The remaining surface area is for heat dissipation and is enclosed only by a black metal mesh. The rear end is crowned by an enormous fixed spoiler mounted on the bodyshell by two arms. ‘Form follows function’ to the nth degree. The spoiler is supported by two pillars connected by the diffuser: clearly inspired by racing.

Special bumpers
In comparison with the Aventador LP 700-4, the exclusive Aventador J has special front and rear bumpers. Both bumpers have been supplemented with carbon fiber fins that act as flow deviators. Their purpose is to achieve a significant increase in the vehicle’s downforce at both the front and the rear. The outside comes inside

The Aventador J’s exterior and interior forms flow seamlessly into each other. This supersports car turns its inside outward and is as open as it can possibly be. Conversely, the exterior ‘flows’ through the interior – a red stripe runs from the front hood, between the two wind deflectors, over the dashboard, down the console to the center tunnel and back up between the seat backs, before leaving the interior and heading for the engine cover panel.

Interior is minimalist and single-minded
This band of color connects the front and the rear of the car, creates a visual separation between the driver and passenger space and is interrupted only by a small control panel housing the starter button and the switches for lights and transmission. The Aventador J is equipped neither with a navigation nor car audio system, nor does it have the associated screen or air conditioning controls – these would simply detract from its one and only raison d’être as an extreme driving experience. What remains, of course, are two programmable TFT displays behind the steering wheel.

The engine cover also brings the inside to the outside. To be more precise, it is not so much a cover but more a framework.

This part has a new geometry (X shape) and is made of carbon fiber. Two large openings lay bare both cylinder banks of the mighty V12 power unit with its 6.5 liters of displacement – a truly stunning sight for every automobile aficionado.

A unique work of art licensed for the road
However, at the end of the Geneva Motor Show, this sight will be the preserve of just one – the future owner of the Lamborghini Aventador J. There is only one of them, no prototypes and no others for the Lamborghini Museum. The buyer can look forward to a truly unique, street-legal work of art. He will possess the most extreme expression of Lamborghini DNA in existence and a real masterpiece of high technology. But the many other fans of the super sports cars from Sant’ Agata Bolognese can rest assured - the Aventador success story has only just begun

Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!