BMW has created quite a stir with its return to small performance coupes. While some say the normally aspirated 3.0-liter found in the 128; is more than adequate for the car, the twin-turbo inline six makes for the wild ride enthusiasts line up for. While most software tuners are holding back on an actual flash for the N54 engine, a few plug-and-play modules are being used with varying degrees of success. We've tried the Turbo Tuner on the 335i and were impressed with the ease of use and instant power produced by the device. No mechanical modifications have to be made to the car, so it is completely reversible. It can even be transferred from one car to the next in a matter of minutes. The Turbo Tuner's distributor has also started pairing the device with an intake and cat-back exhaust system for an added bump in power. We decided to test all three to see what they could do.
2008 BMW 135i
*Engine: 3.0-liter inline six, dohc, 24-valve, turbocharged and intercooled, direct injection
*Transmission: Six-speed manual
*Driveline: Longitudinal front engine, rear-wheel drive
*Temperature: 80-90 degrees F
*Humidity: 29.8-30.03 in-Hg
Test gear: Fourth
*Peak wheel-horsepower: 269 hp @ 5700 rpm
*Peak wheel-torque: 277 lb-ft @ 3300 rpm
This car seemed to have one of the stronger engines we've seen. It put out great power right from the beginning. From experience, we know that these cars put out an extremely flat torque curve from 1300 rpm into the mid-range of around 4500-5000 rpm. With this in mind, we decided that with the hotter afternoon temperatures we would get more accurate top end results by starting our pulls a little later in the rpm band.
Eurobahn cat-back exhaust
*Rear section: $799
*Center section: $499
*Peak wheel-horsepower: 271 hp @ 5600 rpm
*Peak wheel-torque: 275 lb-ft @ 3400 rpm
*Max power gain: 6 hp @ 3700 rpm
*Max torque gain: 7 lb-ft @ 3700 rpm
Although the numbers don't look big, the results are decent for a cat-back exhaust. The real advantage of this system is the weight savings. The Eurobahn exhaust drops 45 pounds off the car, which the 135i desperately needs. It bolts on just like the factory system.
The exhaust is definitely louder and more aggressive than factory; you won't be confused with a stock car.
As we've found in past testing, the real restriction in factory exhausts is in the catalysts. Eurobahn has decided to only do a legal street system and so gains are not as big as they could be with cat deletes. If you want to build a racing vehicle, you may look into that option for maximum power.
*Peak wheel-horsepower: 274 hp @ 5600 rpm
*Peak wheel-torque: 275 lb-ft @ 3500 rpm
*Max power gain: 7 hp @ 6100 rpm
*Max torque gain: 7 lb-ft @ 4900 rpm
Clean, high-quality piece with two filters, one per turbo. Sound is improved with a characteristic turbo whoosh on spool-up. Still uses factory cool air scoop in conjunction with a heat shield to ensure cold induction air.
Check local laws for emissions compliance.
We're not convinced that the full advantage of this system can be simulated on a dyno. It is next to impossible to duplicate the airflow conditions the car would see at highway speeds with a closed hood and a high-pressure pocket in front of the kidney grilles.
*Peak wheel-horsepower: 332 hp @ 5600 rpm*Peak wheel-torque: 336 lb-ft @ 3800 rpm*Max power gain: 60 hp @ 5800 rpm*Max torque gain: 62 lb-ft @ 3800 rpm
Tons of power at a reasonable price. Easy to install and requires no modifications to the car.
Consult your dealer for concerns about your new-car warranty. You may need to remove the device before maintenance or service.